Эдельвейс паркет

“Edelweiss” company parquet flooring construction» 

Amongst many parquet flooring laying technologies the most reliable one is shown technology of “Edelweiss” company.

“Edelweiss” company parquet flooring construction is very meticulously planned. Laying technology guarantees the absence of cracks and distortions, securing reliability and endurance in the process of exploitation.

In order to obtain parquet flooring of “Edelweiss” company quality standard it is necessary to accomplish some parquet laying job steps.

Recommendations: the first and the foremost is to buy “Edelweiss” company parquet. It guarantees you the quality and beauty of the future parquet flooring.

1. Start working on the parquet laying upon condition of temperature of premise not less then 19 Celsius degrees and relative humidity of concrete subfloor and building constructions not more then 5%.
2. Put the primer at the leveled concrete subfloor. Company “Edelweiss” uses German primers of “Wakol” trademark.
3. Glue on moisture-resistant veneer.
4. Spike veneer upon the subfloor by dowels.
5. Grind veneer and mark the chosen parquet blocks positions.
6. Lay parquet blocks on the glue and spike them to the veneer subfloor. It is possible using glue at the polyurethane, MS-polymer base as well as at the base of synthetic resins. Company “Edelweiss” uses professional parquet glues of “Wakol” trademark.
7. Grind the parquet and fill it with putty.
8. Lay on the base paint and then varnish the surface. Company “Edelweiss” uses environmentally safe water base lacquers of “Loba” company.
9. Install plinth.

By following our instructions you will obtain beautiful and reliable flooring.